Code: HI5-2758


Product Code: HI5-2743 (68)

Product Benefit

  • Zinc Free, Ashless, Anti-Wear Hydraulic Oils
  • Blended from high quality mineral oils possessing a high viscosity index
  • Excellent protection against corrosion, resisting emulsification


Hi-Tec ZF Hydraulic Oils meet or exceed the requirements of:

  • Cincinnati Machine P-68, P-69, P-70
  • DIN 51524, parts 1, 2 (HL, HLP), SEB 181 222
  • Denison HF-0, HF-1, HF-2 VDMA 24318, Parker Hannifin France HF-0
  • ISO 6743/4 (HM) * AFNOR NFE 48-603 (HM, HV)
  • US Steel 126, 127 and 136 * Sperry Vickers I-286-S, M-2950-S
  • SS 155434 * DIN 51506 (VBL, VCL, VDL)
  • ISO/DP 6521 (DAA, DAB, DAH, DAG)
  • ISO11158 (HM)

*Also available ISO 10, 15, 22, 32, 46, 68, 100 and 150

In Stock


Hi-Tec ZF Hydraulic Oils are zinc-free, ash-less, anti-Wear lubricants blended from high quality mineral oils possessing a high viscosity index and low pour point. These lubricants give a long trouble free service life and will be chemically stable under severe operating conditions. They give excellent protection against corrosion, resisting emulsification and any formation of unwanted stable foam.
The continuing trend towards higher hydraulic system pressure permits higher performance and reductions in pump and equipment sizes. At the same time, the hard working hydraulic oil is called upon to lubricate, seal and cool the working components under increasing temperature, turbulence and pressure. The continuing need to maintain performance over extended service intervals requires that the specification of additive systems also continues to advance.
Hi-Tec ZF Hydraulic Oils are formulated to meet all these requirements, using paraffinic, high viscosity index mineral oil, augmented with performance additives including a special ashless multifunctional oxidation, rust and wear inhibiting additive package.
The performance benefits of this formulation include:

  • Superior thermal and hydrolytic stability
  • Very high oxidation stability
  • Good demulsibility and anti-foam properties
  • High load carrying capacity – excellent EP performance
  • Excellent corrosion protection for steel and non-ferrous metals
  • Good filterability – lower tendency to block filters
  • Reduced pump wear

*Also available ISO 10, 22, 32, 46, 68, 100, 150 and 220

Hi-Tec Data Sheet 22-220

Additional information

Product Name


Manufacturer's Product Code

HI5-2758 (ISO 32), HI5-2761 (ISO 46), HI5-2763 (ISO 68), HI5-2765 (ISO 100), HI5-2767 (ISO 150)


Mineral oil based hydraulic fluid

Chemical Characteristics





, , ,