All Product Categories
Showing 37–45 of 325 results
-
Transmission Oils
MULTITRANS LV (Replaces ATF DX6)
BENEFITS
- Maintains the performance of new and enhances the performance of older transmissions.
- Lower viscosity provides less friction and promotes better fuel economy.
- Provides consistent shift performance to allow for longer service intervals.
- Extends transmission fluid life and resists fluid breakdown at higher operating temperatures.
- Provides excellent oxidative stability under severe conditions.
- Provides friction stability and durability combined with excellent wear protection
- Reduces sludge and varnish build up.
- Excellent durability for taxis, vehicles used for towing and other hard working applications.
- Protects transmission gears and allows them to operate smoothly.
- Maintains lubricity.
- Flows well for cold start-up.
(0 reviews) -
All Product Categories
Sanitiser Surface Spray
Product Description:
Sanitiser Surface Spray has been designed to provide effective sanitising of inanimate hard surfaces such as walls, floors, sink tops, toilet bowls, tables, chairs, telephones, doorknobs and bed frames. It is specifically formulated for use in the home and around the workplace where good housekeeping is of prime importance in controlling the hazards of bacterial/viral contamination in order to provide a healthy environment.
Directions for Use:
-
Specific Gravity: Approximately 1.0
-
Boiling Point (oC): Approximately 100oC
-
Freezing Point (oC): Approximately 0 oC
Available in Bulk, 1 Litre and 375 mls
.
(0 reviews) -
-
All Product Categories
Sanitiser Surface Spray – Aerosol
Product Description:
Sanitiser Surface Spray is an aerosol surface sanitiser suitable for almost all surfaces. It is effective against bacteria, fungi and viruses. It is deal for hard non-porous surfaces such as metal surfaces, stainless steel surfaces, porcelain and plastic surfaces. It is specifically formulated for use in the home and around the work place where good housekeeping is of prime importance in controlling the hazards of bacterial/viral contamination in order to provide a healthy environment.
Directions for Use:
- Shake well before use.
- Hold can 15-20cm from pre-cleaned surface and spray surface until covered with mist.
- Wipe dry with a clean cloth.
Available in 300g.
(0 reviews) -
All Product Categories
SYN ATF DX3
SPECIFICATIONS
Syn ATF DX3 meets the following demanding performance requirements:
- General Motors DEXRON III (H)
- Ford MERCON
- Allison C4
- Allison TES 389
- Power steering fluid applications
- Hydraulic pump systems.
Available in: Bulk, 1000 Litres, 200 Litres, 60 Litres, 20 Litres, 5 Litres and 1 Litre
(0 reviews) -
Synthetic Gear Oils
Syn MTF 75W90 GL-4
Syn MTF 75W/90 GL-4 is specifically designed to provide very much improved:
- Oil seal life
- Durability (gear surface life)
- Corrosion protection to yellow metals under both wet and dry conditions
- Extended Drain Intervals
SPECIFICATIONS
Syn MTF 75W/90 GL-4 meets or exceeds API GL-4
(0 reviews) -
All Product Categories
SYNMACH MACHINE OIL 150
SPECIFICATIONS:
Syn Machine Oils meet and exceed many international equipment manufacturers’ specifications including:
- US Steel 224
- AGMA 250.04
- AGMA 251.02
- AGMA 9005—D94
- AGMA 9005—E02
- DIN 51517 Part 3
- ISO 12925-1 CKC/CKD
Available in: Bulk, 200 Litres, 20 Litres and 5 Litres (ISO 460 and 1000 only)
(0 reviews) -
All Product Categories
SYNMACH MACHINE OIL 220
SPECIFICATIONS:
Syn Machine Oils meet and exceed many international equipment manufacturers’ specifications including:
- US Steel 224
- AGMA 250.04
- AGMA 251.02
- AGMA 9005—D94
- AGMA 9005—E02
- DIN 51517 Part 3
- ISO 12925-1 CKC/CKD
Available in: Bulk, 200 Litres, 20 Litres and 5 Litres (ISO 460 and 1000 only)
(0 reviews) -
All Product Categories
SYNMACH MACHINE OIL 320
SPECIFICATIONS:
Syn Machine Oils meet and exceed many international equipment manufacturers’ specifications including:
- US Steel 224
- AGMA 250.04
- AGMA 251.02
- AGMA 9005—D94
- AGMA 9005—E02
- DIN 51517 Part 3
- ISO 12925-1 CKC/CKD
Available in: Bulk, 200 Litres, 20 Litres and 5 Litres (ISO 460 and 1000 only)
(0 reviews) -
All Product Categories
SYNMACH MACHINE OIL 460
SPECIFICATIONS:
Syn Machine Oils meet and exceed many international equipment manufacturers’ specifications including:
- US Steel 224
- AGMA 250.04
- AGMA 251.02
- AGMA 9005—D94
- AGMA 9005—E02
- DIN 51517 Part 3
- ISO 12925-1 CKC/CKD
Available in: Bulk, 200 Litres, 20 Litres and 5 Litres (ISO 460 and 1000 only)
(0 reviews)